Still discussing about Canon MP258 printer, in this post I will share list of Canon MP258 error codes and the problem solving guide. Before we continue to the error codes list, first you must know that there are two error types in this printer :
- The error that started with P letter, for example P07
- The error that started with E letter, for example E05
Canon MP258 |
P02 (Carriage Error)
Problem solving :
- Make sure there is no foreign object in the printer's roll
- Clean and check the printer's encoder, may be exposed to splashing ink
Cause : The timing disk is dirty/damage
Problem solving :
- Check the timing disk sensor in the left side
- Check and clean the board
Cause : There is an error to the paper detector
Problem solving :
- Check the ASF/PE sensor unit
- Check the motor
- Finally check the board of Canon MP258
Cause : Overheat in the Canon MP258
Problem solving :
- Clean the printer
- Replace the printer main board
Cause : Ink counter full
Problem solving :
- Reset the Canon MP258 printer using the resetter software
Cause : Printer head overheated, usually for the color cartridge
Problem solving :
- Replace the color cartridge of Canon MP258 printer
Cause : Eeprom in the main board error
Problem solving :
- Replace the main board
Cause : The printer cartridge leaved empty and used to print continously, it result an overheat in one of these component : logic board, carriage unit.
Problem solving :
- Replace the logic board or carriage unit one by one. The problem also can be occured to the cartridges, black and color.
Cause : The printer receive the over current from the USB printer cable
Problem solving :
- Replace the USB cable first
- Replace the main board if the first step doesn't work
Cause : There are damaged in another hardware
Problem solving :
- Replace the Canon MP258 printer main board
Cause : Scanner doesn't work
Problem solving :
- Replace the scanner of Canon MP258 printer
- Replace the main board